Controlling Provisions: The terms and conditions and supplemental exhibits contained herein (the “Terms and Conditions”) shall supersede any provisions, terms, and conditions contained on any purchase order or other written form any direct buyer (“Buyer”) may use or provide (whether received by S.J. Electro Systems, Inc. or any of its subsidiaries or affiliates (collectively, “SJE”) prior or subsequent to the date hereof), and the rights of the parties shall be governed exclusively by the Terms and Conditions as described herein. SJE sells certain services, products, replacement parts and related software (collectively, the "Goods"). The purchase of the Goods is governed by the Terms and Conditions. Any communication by Buyer to SJE to purchase Goods will be treated by SJE as a request to purchase the Goods. The response, however communicated, will be understood by all parties as an agreement by SJE to sell to Buyer the requested Goods pursuant to the Terms and Conditions. SJE specifically opposes any terms or conditions that are in addition to or different from the Terms and Conditions, unless specifically agreed to in each instance in writing by SJE.
Quotations and Acceptance: Acceptance of a quotation, whether by a separate purchase order or by other means, shall constitute an acknowledgement and approval of the quotation as written and an acceptance of the Terms and Conditions. Written quotations shall expire on the date specified in the quotation or, in the absence of such specification, thirty (30) calendar days from the date issued. SJE may, by written notice, terminate a quotation at any time prior to acceptance. Any purchase order received after expiration of a quotation, which SJE honors, shall be subject to the Terms and Conditions. New orders are confirmed at the time of receipt. This confirmation will state the model or part number(s) and quantity being ordered, product pricing, ship to and bill to locations, method of payment and anticipated ship date. In the event of any questions regarding such order confirmation, Buyer should contact applicable Service Center as listed in attached exhibits.
Intellectual Property: All devices, patents, designs (including drawings, plans and specifications), software existing or to be developed, estimates, prices, notes, memos, summaries, electronic data and other documents or information prepared or disclosed by SJE shall remain the sole intellectual property of SJE. Following acceptance and final payment, SJE shall grant to Buyer a non-transferable, non-exclusive license for use and sale of the Goods.
Credit Approval: The credit terms granted on each order are subject to SJE’s continuing approval of Buyer’s credit. SJE may withdraw the extension of credit and require modified payment terms if, in SJE’s sole judgment, Buyer’s credit or financial standing is impaired such that SJE in good faith deems payment insecure.
Prices and Taxes: All prices are FOB shipping point, unless otherwise stated or referenced in attached exhibits. All prices are subject to any commercially reasonable additions that may be necessary to cover any duties, taxes or charges. All prices are in U.S. Dollars. Prices may be subject to change without notice.
Shipping Policy: Shipping and handling charges cover the transportation of the Goods from SJE’s warehouse to Buyer, unless otherwise specified. Standard shipping rates are assessed upon placement of order. SJE uses many methods of shipment including UPS shipping services but reserves the right to substitute carriers without notice. UPS next-day air, UPS second-day air, UPS three-day ground, UPS Express and UPS Expedited are services available to Buyer for expediting orders. Expedited orders will be shipped based on the method Buyer selects. These services may not be available for shipment into all countries.
Shipping weights listed on website are estimates only. The actual shipping weights may vary.
Title, Risk of Loss, Inspection of Equipment: Title and risk of loss to the Goods shall pass to Buyer upon delivery of the Goods to the respective delivery carrier. Buyer shall immediately inspect the Goods upon receipt and any damage must be noted on the delivery carrier’s bill of lading at time of receipt. SJE is not liable for any damages caused by shipping. SJE is not liable for any shortages or nonconformance unless notified by Buyer within two (2) business days of Buyer’s receipt of the Goods.
Operations/Maintenance Manuals: Installation, maintenance and operation manuals will be furnished to Buyer in the number of copies specified at the time of quotation or order. Additional copies subject to charges as outlined in attached exhibits.
Installation and Use: Buyer will be solely responsible for the proper application, installation and service of the Goods. Installation instructions are supplied by SJE and must be followed.
Payment: Buyer shall pay SJE the full purchase price as set forth in the respective order between SJE and Buyer. Unless otherwise agreed to in writing between SJE and Buyer, freight, storage, insurance, taxes, duties, and any governmental charges relating to the Goods shall be paid by Buyer. If SJE is required to pay any such charges, Buyer shall immediately reimburse SJE upon notice from SJE of same. All payments are due within approved credit terms. Buyer may be charged the lower of 1.5% interest per month or the maximum legal rate on all amounts not received by the due date described therein.
Security Interest: SJE shall retain a security interest in the Goods until the full purchase price has been paid. Buyer’s failure to pay any amounts due, including interest, shall give SJE the right to possession and removal of the Goods after providing ten (10) days written notice to Buyer. SJE’s taking of such possession shall be without prejudice to any other remedies SJE may have.
Changes, Cancellations, Returns: All changes, cancellations, or returns must have SJE prior written approval and are conditional on compliance with manufacturer’s cancellation/return policies and subject to restocking fees and service charges. Authorized returns must be packaged and shipped prepaid to SJE as described above.
Return Policy: SJE will only accept Goods returned within one (1) year from the date of manufacture, un-used, and current production models. Returned Material Authorization (“RMA”) numbers must be assigned to any Goods Buyer wishes to return for credit. To obtain an RMA, Buyer must contact SJE’s Service Center at 218-847-1317 or toll free at 888-342-5753. Buyer is responsible for payment of return shipping fees unless such returned Goods result from an SJE order processing error. Upon return, SJE shall reimburse Buyer for the return freight resulting from the return of Goods due to such SJE order processing error. In the event of any return in compliance with this paragraph, SJE will provide Buyer credit for the returned Goods and work to reship correct Goods to Buyer. SJE reserves the right to refuse acceptance of returned Goods after inspection.
Notwithstanding the foregoing (and so long as the return is not due to an order processing error of SJE), a restocking fee shall be charged to Buyer for returned Goods as outlined in the attached Exhibits.
Force Majeure: SJE shall not be liable or responsible to Buyer, nor be deemed to have defaulted under or breached any agreement with Buyer, for any failure or delay in fulfilling or performing any term of any agreement with Buyer, when and to the extent such failure or delay is caused by or results (directly or indirectly) from acts beyond SJE’s reasonable control, including, without limitation: (a) acts of God; (b) flood, fire, earthquake or explosion; (c) war, invasion, hostilities (whether war is declared or not), terrorist threats or acts, riot or other civil unrest: (d) government order or law; (e) actions, embargoes or blockades in effect on or after the date of any subject agreement between SJE and Buyer; (f) action by any governmental authority; (g) national or regional emergency; (h) strikes, labor stoppages or slowdowns or other industrial services; or (i) any other cause beyond the reasonable control of SJE.
Indemnification and Default: In addition to all other amounts due hereunder, Buyer shall reimburse SJE in full for all collection costs or charges, including reasonable attorney fees, which SJE may incur in the collection of any past due amounts from Buyer, including applicable interest on overdue accounts. If Buyer is in default under this or any other agreement with SJE, SJE may defer performance hereunder until such default is resolved. SJE shall have no obligation to provide factory startup assistance or factory training (when requested) until all invoices (including retentions) for equipment have been paid in full. Furthermore, SJE shall have no liability to Buyer to the extent Buyer damages, or any damages are suffered by, or claims are made against Buyer as a result of Buyer’s negligence, willful misconduct, misrepresentation of any Goods, or failure to utilize the Goods properly.
Warranty and Liability
During the warranty period, Buyer’s exclusive remedy will be either repair or replacement, at the sole discretion of SJE and subject to the Terms and Conditions of any component which proves to be defective due to defective materials or workmanship of SJE. Refer to the attached Exhibits for product warranty by family.
SJE DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE, AND SJE SHALL NOT, IN ANY MATTER, BE LIABLE FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL OR CONSEQUENTIAL DAMAGES THAT RESULT FROM A BREACH OF CONTRACT, BREACH OF WARRANTY (EXPRESS OR IMPLIED), STRICT LIABILITY, PRODUCT LIABILITY OR OTHERWISE.
Furthermore, this warranty shall not apply to: (a) damage due to any weather-related or other conditions beyond the control of SJE; (b) defects or malfunctions resulting from the Goods not installed, operated, or maintained in accordance with instructions provided, applicable local codes, ordinances, or accepted trade practices; (c) failures resulting from abuse, misuse, accident, or negligence; or (d) Goods repaired and/or modified without prior written authorization from SJE.
Some states do not allow limitations on implied warranty duration, as such, this limitation may not apply to Buyer. Some states do not allow the exclusion or limitation of incidental or consequential damages, as such, these limitations or exclusions may not apply to Buyer. The above-described warranty gives Buyer specific legal rights, and Buyer may also have other rights which vary from state to state.
ANY ELECTRICAL WIRING AND SERVICING OF THE GOODS MUST BE PERFORMED BY A LICENSED ELECTRICIAN. WARRANTY CLAIMS FOR GOODS WHICH WERE AT ANY TIME WIRED OR SERVICED BY ANYONE OTHER THAN A LICENSED ELECTRICIAN SHALL NOT BE HONORED IN WHOLE OR PART BY SJE.
TO OBTAIN WARRANTY SERVICE: Buyer shall assume all responsibility and expense for removal, reinstallation, and freight associated with any warranty service. Any Goods to be repaired or replaced under this warranty must be returned to SJE, or such place as designated by SJE. Buyer can contact SJE Service Center at 218-847-1317 or toll free at 888-342-5753 for an RMA on any Goods being submitted for a warranty claim.
Applicable Law and Forum: Any disputes between Buyer and SJE shall be venued in Becker County District Court in the State of Minnesota. Buyer agrees to submit to such jurisdiction and agrees that the dispute shall be governed by and construed in accordance with the laws of the State of Minnesota without giving effect to any choice or conflict of law provision or rule.
CSI Controls is a trademark in the SJE family of products.
Submittal Drawings: Submittal of drawings for approval, if required, will be made after receipt of complete information from Buyer. The quantity of the submittal drawing sets will be specified in the purchase order or contract documents. Additional sets will be supplied by CSI Controls for $300.00 per set. Buyer must return to CSI Controls two (2) final approved drawing sets; such return shall constitute notice to CSI Controls of final acceptance by Buyer of such drawing sets and binding indication to CSI Controls to proceed with manufacturing. If Buyer’s order is conditioned upon “engineer approval”, Buyer must also provide written notification of such approval to CSI Controls with such drawing sets in the form required pursuant to the submittal.
Operations/Maintenance Manuals: Installation, maintenance and operation manuals will be furnished to Buyer in the number of copies specified at the time of quotation or order. If not specified, one (1) will be provided to Buyer at no added cost, with additional copies at $300.00 each.
Switches and alarms: 25% of net invoice price.
Controls Panels: Variable based on the number of options included, with a 40% of net invoice price minimum. Control panel models including PowerZone Series, Fusion Series, RK Series, and “Fusion” Plus Series; panels including any "non-catalog" options; obsolete panels; and panels more than one (1) year from the date of manufacture cannot be returned for any reason.
Engineered Custom Panels: cannot be returned.
CSI Controls reserves the right to adjust restocking fees at any time without notice.
Warranty and Liability: . CSI CONTROLS PROVIDES A LIMITED WARRANTY ON GOODS SUPPLIED BY CSI CONTROLS FOR THREE (3) YEARS UNLESS OTHERWISE STATED IN THE RESPECTIVE QUOTE. THE THREE-YEAR LIMITED WARRANTY DOES NOT APPLY TO:
THE MOTOR START KIT COMPONENTS. CSI CONTROLS PROVIDES A LIMITED WARRANTY ON MOTOR START KIT COMPONENTS SUPPLIED BY CSI CONTROLS FOR ONE (1) YEAR. CSI CONTROLS MAKES NO WARRANTIES OF ANY TYPE WITH RESPECT TO MOTOR START KITS SUPPLIED BY BUYER.
“FUSION” PLUS CONTROL PANELS. CSI CONTROLS PROVIDES A LIMITED WARRANTY ON “FUSION” PLUS CONTROL PANELS FOR TWO (2) YEARS.
ENGINEERED CUSTOM PANELS. CSI CONTROLS PROVIDES A LIMITED WARRANTY ON CUSTOM PANELS AS PROVIDED IN EACH RESPECTIVE QUOTE RELATED THERETO.
PRESSURE TRANSDUCER INCLUDED WITH VARIOspeed® PRODUCTS. CSI CONTROLS PROVIDES A LIMITED WARRANTY ON VARIOspeed® PRESSURE TRANSDUCERS FOR ONE (1) YEAR.
INTERNATIONAL PRODUCTS. CSI CONTROLS PROVIDES A LIMITED WARRANTY ON GOODS SHIPPED TO BUYERS OUTSIDE OF THE U.S. AND ITS TERRITORIES AND CANADA FOR ONE (1) YEAR UNLESS OTHERWISE STATED IN THE RESPECTIVE QUOTE.
ANY SOFTWARE OR RELATED SERVICES PROVIDED IN CONJUNCTION WITH THE GOODS, ALL OF WHICH ARE SUBJECT TO THE TERMS AND CONDITIONS IN THE APPLICABLE END USER LICENSE AGREEMENT.
CSI Controls l 220 Ohio Street l Ashland, Ohio 44805 Toll Free: 1-800-363-5842 l Phone: 419-281-5767 l Fax: 419-289-2535