The DPC-4F Duplex/Backup Controller is a multi-functional pump controller designed to operate two pumps. The controller can be configured to operate as duplex backup controller or as a duplex controller. The controller operated using inputs from 1-4 float switches.
Multi-Function
MODE 1: 1-float backup operation with pump run timer
MODE 2: 2-float backup operation
MODE 3: 3- or 4-float backup operation
MODE 4: 3- or 4-float duplex operation
Features
- Green LED indicators for Power On and Pump Call-To-Run
- Red LED indicator for Alarm and Backup Mode
- Amber LED indicators for Float Status
- Float out of sequence detection (Mode 4 only)
- HIGH level relay directly operated by FLOAT 4, independent of microcontroller
- 12 VDC power to float switches Relay Outputs: Pump Call-To-Run (2), Low, High, Horn/Backup
- UL Listed
- 2-year limited warranty
Specifications
- Electrical Ratings:
- Input voltage: 100 ~ 250 VAC (50/60 Hz)
- Transient Protection: 10,000 V for 20 microseconds
- Float switch inputs: 12 VDC, 26 mA each
- Max float switch cable length: 328 feet (100 m)
- Relay Outputs:
- Rating: 5 A max. @ 240 VAC
- Mechanical: 10,000,000 operations
- Full load: 100,000 operations
- Environmental Rating:
- Internal panel mount only
- Operating temperature: -18°F ~ 140°F (-28°C ~ 60°C)
- Storage temperature: -40°F ~ 185°F (-40°C ~ 85°C)
- Relative humidity: 95% non-condensing
- Conductor Size and Terminal Torque Requirements:
- Float terminals: 22-14 AWG, 7 in-lbs.
- Top green terminals (pluggable): 22-14 AWG, 7in-lbs
- Dimensions:
- Enclosure: 5.81 x 3.5 x 1.98 inches (14.8 x 8.9 x 5.1 cm)
- Mounting holes: 5.43 x 2.50 inches (13.8 x 6.4 cm)
- Recommended mounting screws: Size 8
- Weight: 7.5 oz (213 g)
Downloads
Visit our downloads section of this website for additional literature.
