RK Series™ Single Phase Duplex Control Panel

Single Phase, Duplex Demand Float Control System for Pump Control and System Monitoring

rk single phase duplex diagram
The RK Series™ Single Phase Duplex panel is designed to control two 115/230 VAC single phase pumps in water and sewage installations. The protective inner door features panel operating status indicators, control buttons and provides access to the pump and control circuit breakers. The controller provides for alternation of the pumps for even usage.

COMPONENTS

  1. NEMA 4X enclosure rated for indoor or outdoor use
  2. Lockable latches for added safety
  3. 360° red alarm beacon for visual alert
  4. Magnetic motor contactors control the pump motor load by switching the electrical lines
  5. Circuit breakers provide pump and control/alarm disconnect and branch circuit protection
  6. Terminal strip field wiring of incoming power, floats, and pumps
  7. Ground lugs
  8. Molded inner door protects from high voltage, and mounting location for indicators, control buttons, and controller circuit board
  9. Green LEDs provide power indication for control and alarm circuit power
  10. Red LEDs provide indication when either control or alarm fuse is blown
  11. Float status LEDs provide tank level indication and float out-of-sequence detection (High Level – red, Pump Start Level – yellow, Pump Stop Level – green
  12. Green Pump Run LEDs provides indication when pumps are called to run
  13. Pump Hand/Run buttons operate the pumps manually
  14. Alarm Test/Silence button
  15. Red LED alarm indication for high water
  16. Piezo audible alarm

Features

Features:
  • NEMA 4X engineered thermoplastic enclosure with lockable latches
  • Flashing red 360° alarm beacon with horn, includes innovative touch to silence pad.
  • Float indication lights allow the user to see the status of each float and flashes should a float fail out-of-sequence.
  • Pump push to run with low level protection when activated manually
  • Includes easy access touch safe fuses
  • Timed dose control option available or can be easily retrofitted in the field
Options:
  • Digital Interface Board (DIB)
  • Digital Display Center (DDC)

Specifications

VOLTAGE SUPPLY:

  • Pumps: 115 VAC or 230 VAC 50/60 Hz 1Ø
  • Control/Alarm: 115 VAC 60 Hz 1Ø

ENCLOSURE:

  • 12 x 10 x 6 inch (30.5 x 25.4 x 15.2 cm)
  • NEMA 4X ultraviolet stabilized thermoplastic rated for indoor/outdoor use with mounting feet

INNER DOOR:

  • molded thermoplastic

LOCKING LATCHES (2):

  • stainless steel, padlockable

FLOAT CONTROL VOLTAGE:

  • 115 VAC

MOTOR STARTERS:

  • magnetic motor contactor

PUMP AMPS:

  • 0-12 Amps, 12-18 Amps, 18-24 Amps

ALARM HORN:

  • 83-85 decibel rating

FLASHING RED LED ALARM LIGHT 360°

For models and specifications
call toll free: 1-800-363-5842 or

Contact us